You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
Repository navigation
Sheet metal: Convert to Sheet Metal makes a flat 3D print that folds into the body #13905
A new option in Convert to Sheet Metal turns a solid or shelled body into one flat part for a 3D printer. After printing, the user folds the part by hand into the original body. This is for people who want to create very strong or smooth objects. Flat parts print faster, need no supports and have smooth outer faces. Alternatively you can create very fascinating Origami-style parts or puzzles.
How it works for the user:
The user checks "Foldable 3D print" in the Convert to Sheet Metal dialog. The sheet metal rule is then not used.
The user picks the fixed face (it lies on the print bed) and the bend edges, as for sheet metal.
Each bend becomes a V-groove with a thin film under it. The film is the hinge. The user sets the wall thickness, the film thickness and a clearance.
Edges that are not bends meet butted or mitred.
An edge can be joined with filament: the edge is split into fingers that belong to the two faces by turns, and a square channel runs through all fingers. The user pushes a piece of filament (1.75 mm, 2.85 mm or another diameter) through the channel. The user sets the number of fingers and the channel tolerance.
With "Join fold edges with filament", the bend edges get the same fingers and channel. Then the film is not the only thing that holds a bend.
When unfolded planes overlap themselves, SolidCraft says which faces overlap. The user picks Split Edges, and the faces past a split edge print as a separate part beside the rest.
Refold shows the print folded into the body, with its fingers and channels. Unfold makes it flat again. The flat pattern shows the bend lines.
Later steps, not in the first PR: press-fit joints (a nub and a dimple), screw joints, curved faces, and an allowance for how the film really bends (measured on test prints).
Activity
github-actions commentedon Nov 8, 2026
Claimed by @cvengels through #13906. The claim lapses after 14 days without pushes.
WIP: Unfold for Printing wizard (tangency-labs#13905)
WIP: Unfold for Printing follows the shared text, theme and dash help…
WIP: Unfold for Printing carves out hole walls and snaps them in (tan…
WIP: Unfold for Printing gets a second generator, with press fits (ta…
WIP: Unfold for Printing makes its parts one way only, with filament …