Skip to content

About

Set of electronic boards for Grabette/Gripette

Resources

Stars

11 stars

Watchers

1 watching

Forks

Repository files navigation

"Grabette"/"Gripette" Electronic Boards

This repository is part of the "Grabette" project. It gathers several small PCBs of Grabette/Gripette.

Grabette

Grapette is the data acquisition side.

grabette wiring

It is based on a battery-powered Raspberry PI 4 plus a HAT to which a serie of sensing elements is added. Camera, Stereo Camera, angle sensors, IMU (included on the HAT) and a button + a LED as user interface.

  • angle_sensor

3d view

  • IMU (Not used)

3d view

  • HMI

3d view

Gripette

Gripette is the actuator side.

gripette wiring

It also gathers data with the same Camera/Stereo Camera system and drive motors. The "under-HAT" electronic board is associated to a Raspberry PI zero 2W. It has a interface to the motors (now Feetech wiring). A Bulk-head board makes the mechanical interface with the arm that holds Gripette.

3d view

Bulk-head:

3d view

Basically

  • Designed with KiCAD 9.

About

Set of electronic boards for Grabette/Gripette

Resources

Stars

11 stars

Watchers

1 watching

Forks

Releases

Packages

Contributors