Controlling a tvone 1T-SX-654, adress?

[Safaribility]

Hi!

I'm currently trying to control a tvone hdmi switch with your serial ir blaster.
Unfortunately its not working so far.
A command for example would be >>HDMI1
The manual says that the delimiter is

So the command to switch to HDMI1 in HEX would be
3E3C43463E3C4C463E0A3E3C43463E3C4C463E0A483C43463E3C4C463E0A443C43463E3C4C463E0A4D3C43463E3C4C463E0A493C43463E3C4C463E0A313C43463E3C4C463E0A

There is the adress field in your plugin, what is blank by now. What do i have to type in there?

[asaravi]

hey @Safaribility

That HEX address seems a little too long to be NEC, but I could be wrong. In the next version of Serial IR Blaster ill be adding a decoder button.

I'll work on it tonight and try to submit it (there are other issues that I would like solved). It should be in version 1.2

Currently, the Arduino APP only support NEC commands, but based on your needs I can expand it. But first we have to use the decoder to decode your controller to the correct format.

[asaravi]

You can try the new release (it'll be published in a few days by the Elgato team) early if you wish:
https://github.com/feydelight/StreamDeck-SerialIRBlaster/releases/tag/release%2F1.2

Just download the com.feydelight.serialirblaster.streamDeckPlugin uninstall v1.1, and double click this to install

[Safaribility]

Hi, and sorry for the delayed answer.
I gues it's not working because of the NEC Protocol.
The Switch needs the RS232 Protocol.

But still in V1.2 there is no delimiter field?

[asaravi]

Hi @Safaribility
Currently this blaster is allowing NEC protocol to go through only. I left the rest out as I don't have a way of testing it currently as none of my IR remotes I have access to use any other protocol.

If your setup has an IR decoder in it, can you put the Decode button into your StreamDeck, and press the button, click a button on your remote, and then look in the logs inside:
<User Folder>\AppData\Roaming\Elgato\StreamDeck\Plugins\com.feydelight.serialirblaster.sdPlugin\pluginlog.log

Try a couple of different buttons and make sure they log in there and send me the info. Based on that I can add the protocol that you need.