NeoPixelBus.h Will Not Compiler (Arduino 2.3.7 for ESP32S3 Dev Module)

[BoCoKeith]

NOTE: If you are seeking help or have questions, this is NOT the place to do it. For questions and support, jump on Gitter and ask away.

Describe the bug
NeoPixelBus.h will not compile using Arduino IDE 2.3.7 targeting "ESP32S3 Dev Module". The error message is

	In file included from C:\Users\me\OneDrive\Documents\Arduino\libraries\NeoPixelBus_by_Makuna\src/internal/NeoMethods.h:65,
					 from C:\Users\me\OneDrive\Documents\Arduino\libraries\NeoPixelBus_by_Makuna\src/NeoPixelBus.h:43,
					 from C:\Users\me\AppData\Local\Temp\.arduinoIDE-unsaved2026123-24652-nuqf6e.f32l\sketch_feb23a\sketch_feb23a.ino:1:
	C:\Users\me\OneDrive\Documents\Arduino\libraries\NeoPixelBus_by_Makuna\src/internal/methods/NeoEsp32LcdXMethod.h: In member function 'void NeoEsp32LcdMuxBus<T_BUSCONTEXT>::Initialize(uint8_t, uint16_t, bool)':
	C:\Users\me\OneDrive\Documents\Arduino\libraries\NeoPixelBus_by_Makuna\src/internal/methods/NeoEsp32LcdXMethod.h:545:9: error: there are no arguments to 'gpio_hal_iomux_func_sel' that depend on a template parameter, so a declaration of 'gpio_hal_iomux_func_sel' must be available [-fpermissive]
	  545 |         gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[pin], PIN_FUNC_GPIO);
		  |         ^~~~~~~~~~~~~~~~~~~~~~~
	C:\Users\me\OneDrive\Documents\Arduino\libraries\NeoPixelBus_by_Makuna\src/internal/methods/NeoEsp32LcdXMethod.h:545:9: note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)
	Using library NeoPixelBus by Makuna at version 2.8.4 in folder: C:\Users\me\OneDrive\Documents\Arduino\libraries\NeoPixelBus_by_Makuna 
	Using library SPI at version 3.3.6 in folder: C:\Users\me\AppData\Local\Arduino15\packages\esp32\hardware\esp32\3.3.6\libraries\SPI 

To Reproduce
Steps to reproduce the behavior:

1. Try to compile "NeoPixelBus.h" from any sketch in Arduino IDE 2.3.7 targeting an "ESP32S3 Dev Module" board.

Expected behavior
Successful compilation.

Development environment (please complete the following information):

• OS: Windows 11
• Build Environment: Arduino IDE 2.3.7
• Board target: "ESP32S3 Dev Module"
• Library version: 2.8.4

Minimal Sketch that reproduced the problem:

#include "NeoPixelBus.h"

void setup() {
}

void loop() {
}