Request: Pro License via Protocol Log / Sample Data

[jonahwolpert]

Contribution type: Protocol log / sample data for an unsupported device.

I built and use an ASCII command-shell protocol over USB serial for embedded
bring-up and reverse-engineering work: a plain ESP32-WROOM-32 devkit exposing
UART terminal/bridge/sniffer, GPIO monitor/drive, a software logic analyzer,
frequency counter, pulse/PWM generation, I2C/SPI tools, ADC voltage sensing,
and a JTAG presence scan, all behind one interactive command shell (HELP,
STATUS, VERSION, UART BRIDGE, GPIO WATCH, LA CAPTURE, I2C SCAN,
etc.) over 115200-baud USB-UART.

Firmware source + README + a real captured serial sample (boot banner and
full command reference, captured live off the running board) are here:

https://github.com/jonahwolpert/esp32-hardware-lab

Sample log directly: https://github.com/jonahwolpert/esp32-hardware-lab/blob/master/samples/boot-and-help-menu.log

This is a live device I run day-to-day (not a one-off), so I'm happy to
capture more targeted samples (specific subcommand output, binary-mode
frames, etc.) if that's useful for testing Serial Studio's serial/console
handling against a real interactive-shell device.

Email for the license key: jonah.e.wolpert@gmail.com

[alex-spataru]

Hi Jonah,

Just sent you an email with your license key. Hope Serial Studio Pro helps you with your projects!

Best,
Alex Spataru