Makefile

VERSION := 1.0.0
INSTALL_DIR := /usr/local/bin
CONFIG_DIR := /etc/wald
COMPLETION_DIR := /etc/bash_completion.d

BLUE := \033[0;34m
GREEN := \033[0;32m
YELLOW := \033[1;33m
RED := \033[0;31m
NC := \033[0m

.PHONY: help install uninstall check test clean package

help:
	@echo "$(BLUE)WALD CLI - WAL-G + Docker Management Tool$(NC)"
	@echo ""
	@echo "$(GREEN)Available targets:$(NC)"
	@echo "  $(YELLOW)install$(NC)     - Install WALD CLI system-wide (requires sudo)"
	@echo "  $(YELLOW)uninstall$(NC)   - Remove WALD CLI from system (requires sudo)"
	@echo "  $(YELLOW)check$(NC)       - Check system dependencies"
	@echo "  $(YELLOW)test$(NC)        - Run basic functionality tests"
	@echo "  $(YELLOW)package$(NC)     - Create distribution package"
	@echo "  $(YELLOW)clean$(NC)       - Clean build artifacts"
	@echo "  $(YELLOW)help$(NC)        - Show this help message"
	@echo ""
	@echo "$(GREEN)Installation:$(NC)"
	@echo "  make check      "
	@echo "  sudo make install"
	@echo ""
	@echo "$(GREEN)Usage after install:$(NC)"
	@echo "  wald config     "
	@echo "  wald backup     "
	@echo "  wald restore    "

check:
	@echo "$(BLUE)Checking system dependencies...$(NC)"
	@echo ""
	
	@if [ ! -f /etc/lsb-release ]; then \
		echo "$(RED)❌ This tool is designed for Ubuntu systems$(NC)"; \
		exit 1; \
	fi
	
	@. /etc/lsb-release && echo "$(GREEN)✅ Ubuntu $$DISTRIB_RELEASE detected$(NC)"
	
	@if command -v docker >/dev/null 2>&1; then \
		DOCKER_VERSION=$$(docker --version | cut -d' ' -f3 | cut -d',' -f1); \
		echo "$(GREEN)✅ Docker found: v$$DOCKER_VERSION$(NC)"; \
	else \
		echo "$(RED)❌ Docker not found$(NC)"; \
		echo "   Install with: curl -fsSL https://get.docker.com | sudo sh"; \
		exit 1; \
	fi
	
	@if docker compose version >/dev/null 2>&1; then \
		COMPOSE_VERSION=$$(docker compose version --short 2>/dev/null || echo "unknown"); \
		echo "$(GREEN)✅ Docker Compose found: v$$COMPOSE_VERSION$(NC)"; \
	elif command -v docker-compose >/dev/null 2>&1; then \
		COMPOSE_VERSION=$$(docker-compose --version | cut -d' ' -f3 | cut -d',' -f1); \
		echo "$(GREEN)✅ Docker Compose found: v$$COMPOSE_VERSION$(NC)"; \
	else \
		echo "$(YELLOW)⚠ Docker Compose not found (recommended for easier setup)$(NC)"; \
	fi
	
	@if [ -f "wald" ]; then \
		echo "$(GREEN)✅ WALD script found$(NC)"; \
	else \
		echo "$(RED)❌ WALD script not found in current directory$(NC)"; \
		exit 1; \
	fi
	
	@echo ""
	@echo "$(GREEN)✅ All dependencies satisfied$(NC)"

install: check
	@echo "$(BLUE)Installing WALD CLI v$(VERSION)...$(NC)"
	@if [ "$$(id -u)" -ne 0 ]; then \
		echo "$(RED)❌ Installation requires root privileges$(NC)"; \
		echo "   Run: sudo make install"; \
		exit 1; \
	fi
	@chmod +x install.sh
	@./install.sh

uninstall:
	@echo "$(BLUE)Uninstalling WALD CLI...$(NC)"
	@if [ "$$(id -u)" -ne 0 ]; then \
		echo "$(RED)❌ Uninstallation requires root privileges$(NC)"; \
		echo "   Run: sudo make uninstall"; \
		exit 1; \
	fi
	@if [ -f "uninstall.sh" ]; then \
		chmod +x uninstall.sh; \
		./uninstall.sh; \
	else \
		echo "$(RED)❌ uninstall.sh not found$(NC)"; \
		exit 1; \
	fi

test:
	@echo "$(BLUE)Testing WALD CLI functionality...$(NC)"
	@echo ""
	
	@if command -v wald >/dev/null 2>&1; then \
		echo "$(GREEN)✅ WALD CLI is installed$(NC)"; \
		WALD_VERSION=$$(wald version 2>/dev/null || echo "unknown"); \
		echo "   Version: $$WALD_VERSION"; \
	else \
		echo "$(RED)❌ WALD CLI not found$(NC)"; \
		echo "   Install with: sudo make install"; \
		exit 1; \
	fi
	
	@if wald help >/dev/null 2>&1; then \
		echo "$(GREEN)✅ Help command works$(NC)"; \
	else \
		echo "$(RED)❌ Help command failed$(NC)"; \
		exit 1; \
	fi
	
	@if docker info >/dev/null 2>&1; then \
		echo "$(GREEN)✅ Docker daemon accessible$(NC)"; \
	else \
		echo "$(YELLOW)⚠ Docker daemon not accessible (may need to add user to docker group)$(NC)"; \
	fi
	
	@if [ -f "$(CONFIG_DIR)/docker-compose.example.yml" ]; then \
		echo "$(GREEN)✅ Example configuration available$(NC)"; \
	else \
		echo "$(YELLOW)⚠ Example configuration not found$(NC)"; \
	fi
	
	@if [ -f "$(COMPLETION_DIR)/wald" ]; then \
		echo "$(GREEN)✅ Bash completion installed$(NC)"; \
	else \
		echo "$(YELLOW)⚠ Bash completion not found$(NC)"; \
	fi
	
	@echo ""
	@echo "$(GREEN)✅ Basic tests completed$(NC)"

package: clean
	@echo "$(BLUE)Creating distribution package...$(NC)"
	@mkdir -p dist/wald-cli-$(VERSION)
	
	@cp wald dist/wald-cli-$(VERSION)/
	@cp install.sh dist/wald-cli-$(VERSION)/
	@cp uninstall.sh dist/wald-cli-$(VERSION)/
	@cp Makefile dist/wald-cli-$(VERSION)/
	@cp README.md dist/wald-cli-$(VERSION)/
	
	@chmod +x dist/wald-cli-$(VERSION)/wald
	@chmod +x dist/wald-cli-$(VERSION)/install.sh
	@chmod +x dist/wald-cli-$(VERSION)/uninstall.sh
	
	@cd dist && tar -czf wald-cli-$(VERSION).tar.gz wald-cli-$(VERSION)/
	@cd dist && zip -r wald-cli-$(VERSION).zip wald-cli-$(VERSION)/ >/dev/null
	
	@echo "$(GREEN)✅ Package created:$(NC)"
	@echo "   dist/wald-cli-$(VERSION).tar.gz"
	@echo "   dist/wald-cli-$(VERSION).zip"

clean:
	@echo "$(BLUE)Cleaning build artifacts...$(NC)"
	@rm -rf dist/
	@echo "$(GREEN)✅ Clean completed$(NC)"

quick-install:
	@echo "$(BLUE)Quick installation from GitHub...$(NC)"
	@echo "$(YELLOW)This will download and install WALD CLI$(NC)"
	@echo ""
	@curl -fsSL https://raw.githubusercontent.com/lafayettegabe/wald-cli/main/install.sh | sudo bash

dev-check:
	@echo "$(BLUE)Development checks...$(NC)"
	@bash -n wald && echo "$(GREEN)✅ Bash syntax OK$(NC)" || echo "$(RED)❌ Bash syntax error$(NC)"
	@bash -n install.sh && echo "$(GREEN)✅ Install script syntax OK$(NC)" || echo "$(RED)❌ Install script syntax error$(NC)"
	@bash -n uninstall.sh && echo "$(GREEN)✅ Uninstall script syntax OK$(NC)" || echo "$(RED)❌ Uninstall script syntax error$(NC)"

status:
	@echo "$(BLUE)WALD CLI Installation Status$(NC)"
	@echo ""
	
	@if [ -f "$(INSTALL_DIR)/wald" ]; then \
		echo "$(GREEN)✅ Binary: $(INSTALL_DIR)/wald$(NC)"; \
		VERSION_INSTALLED=$$($(INSTALL_DIR)/wald version 2>/dev/null || echo "unknown"); \
		echo "   Version: $$VERSION_INSTALLED"; \
	else \
		echo "$(RED)❌ Binary not installed$(NC)"; \
	fi
	
	@if [ -f "$(COMPLETION_DIR)/wald" ]; then \
		echo "$(GREEN)✅ Bash completion installed$(NC)"; \
	else \
		echo "$(RED)❌ Bash completion not installed$(NC)"; \
	fi
	
	@if [ -d "$(CONFIG_DIR)" ]; then \
		echo "$(GREEN)✅ Configuration directory: $(CONFIG_DIR)$(NC)"; \
		CONFIG_FILES=$$(ls -1 $(CONFIG_DIR) 2>/dev/null | wc -l); \
		echo "   Files: $$CONFIG_FILES"; \
	else \
		echo "$(RED)❌ Configuration directory not found$(NC)"; \
	fi
	
	@if command -v wald >/dev/null 2>&1; then \
		echo "$(GREEN)✅ Command available in PATH$(NC)"; \
	else \
		echo "$(RED)❌ Command not available in PATH$(NC)"; \
	fi